|
Account, Traffic Cost Summary
|
- Date: The report can contain data for Month-To-Date, User-Defined
Range, or Last Month.
- Group By: Pool Name or Report Group.
If you decide to save the report as a Scheduled Report, then you must also select
the frequency.
- Frequency: The available options vary based on the selected Date.
- A "Month-To-Date" report can be delivered daily, on a specific day of the
week, or on the 15th of each month.
- A "Last Month" report will be delivered on the 1st of each month.
|
- For a User-Defined Range, the From date MUST fall on the first day of the
current month. The To date can be any date before the current date.
- Because the data for this report is generated by an End-of-Day billing job,
the report will reflect data correctly up to the last End-of-Day job, which is
the previous day at midnight GMT.
|
|
Account, Devices Detail
|
- Status: ALL, Bill, Provision, Suspended, or Cancel. The "ALL" status
option is selected by default.
- Service Name: The "ALL" Service Name option is selected by default. All
Service Names associated with your account are also available in the drop-down
menu.
- Rate Plan: The "ALL" Rate Plan option is selected by default. All Rate
Plans associated with your account are also available in the drop-down
menu.
- Pool Name: The "ALL" Pool Name option is selected be default. All Pool
Names associated with your account are also available in the drop-down
menu.
- Date: The report can contain data for All days, Month-To-Date,
User-Defined Range, Last 3 Days, or Last 7 Days.
- Report Group: To filter out one or more Report Groups, enter the Report
Group values in the provided text box separated by a comma.
If you decide to save the report as a Scheduled Report, then you can modify the
data dates and select the frequency.
- Date: The report can contain data for All days, Last 1 Day, Last 7
Days, Last Month, or Month-To-Date.
- Frequency: The available options vary based on the selected Date:
- An "All" report can be delivered daily, on a specific day of the week, or
on the 1st or 15th of each month.
- A "Last 1 Day" report will be delivered daily.
- A "Last 7 Days" report will be delivered once each week. A specific day of
the week can be selected.
- A "Last Month" report will be delivered on the 1st of each month.
- A "Month-To-Date" report is delivered on the 15th of each month.
|
- It may take up to 60 minutes before new devices or recent changes to a device
are reflected in the report.
- The downloaded report will only contain the first 50,000 report entries.
- There is no limit to the amount of entries delivered in the scheduled Account
Devices Detail report.
|
|
Account, Devices Summary
|
- Group By: Devices can be grouped by Pool Name, Report Group, Rate Plan,
Status, Pool Name + Status, Report Group + Status or Rate Plan + Status.
If you decide to save the report as a Scheduled Report, then you can modify the
data dates and select the frequency.
- Frequency: The report can be delivered Daily, a Specific Day of the
Week, or on the 1st or 15th of each month.
|
- It may take up to 60 minutes before new devices or recent changes to a device
are reflected in the report.
|
|
Device, Daily Traffic Usage
|
- Date: Select to include usage over the Month-To-Date, User-Defined
Range, Last 1 Day, Last 3 Days, Last 7 Days, or Last Month.
- Device Attribute: Select the method you will use to specify the devices
to include in the report: ICCID, EID, IMSI, or MSISDN.
- Device List: Device IDs must be separated by a comma or listed one per
line. A maximum of 10 devices can be entered.
If you decide to save the report as a Scheduled Report, then you can modify your
selections.
- Date: The report can contain data for Month-To-Date, Last 1 Day, Last 7
Days, or Last Month.
- If you date selection is "Last 1 Day," you can select the toggle for All
Devices to report on all devices your account.
- Frequency: The available options will vary depending on the selected
Date:
- A "Month-To-Date" report will be delivered on the 15th of each month.
- A "Last 1 Day" report will be delivered daily.
- A "Last 7 Days" report will be delivered once each week. A specific day of
the week can be selected.
- A "Last Month" report will be delivered on the 1st of each month.
|
- The "Data Usage" column in this report corresponds to the sum of data "From"
and "To" the device in its "stopped" events. Started, stopped, and continued
events are listed in the Device Traffic Detail report.
- The data provided in this report is a rounded summary of the device's traffic
transactions. This value may be slightly higher than the actual sum of all the
data traffic records in the traffic detail report.
|
|
Device, Traffic Summary
|
- Date: Select to include data for the Month-To-Date, User-Defined Range,
Last 1 Day, Last 3 Days, Last 7 Days, or Last Month.
- Device Attribute: Select the method you will use to specify the devices
to include in the report: ICCID, EID, IMSI, or MSISDN.
- Device List: Device IDs must be separated by a comma or listed one per
line. A maximum of 10 devices can be entered.
If you decide to save the report as a Scheduled Report, then you can modify your
selections.
- Date: The report can contain data for Month-To-Date, Last 1 Day, Last 7
Days, or Last Month.
- If you date selection is "Last 1 Day," you can select the toggle for All
Devices to report on all devices your account.
- Frequency: The available options will vary depending on the selected
Date:
- A "Month-To-Date" report will be delivered on the 15th of each month.
- A "Last 1 Day" report will be delivered daily.
- A "Last 7 Days" report will be delivered once each week. A specific day of
the week can be selected.
- A "Last Month" report will be delivered on the 1st of each month.
|
- For a User-Defined Range, the From date MUST fall on the first day of the
current month. The To date can be any date before the current date.
- The data provided in this report is a rounded summary of the device's traffic
transactions. This value may be slightly higher than the actual sum of all the
data traffic records in the traffic detail report.
|
|
Device, Traffic Detail
|
- Date: Select to include traffic from the Month-To-Date, User-Defined
Range, Last 1 Day, Last 3 Days, Last 7 Days, or Last Month.
- Device Attribute: Select the method you will use to specify the devices
to include in the report: ICCID, EID, IMSI, or MSISDN.
- Device List: Device IDs must be separated by a comma or listed one per
line. A maximum of 10 devices can be entered.
- Traffic Types: The "All" Traffic Types option is selected by default.
Selecting another radio button will display only that traffic type in the
generated report:
- Control Plane: Cellular registration events for the device(s) while
operating in the cellular network can be a Registration, De-registration, or
Clear Registration event. Please note that Control Plane information is not
available for Dual-Mode A-LH devices.
- Packet: Start, Stop, and Continue events for Packet data
sessions
- SMS: MO and MT SMS
- Voice: MO and MT Voice
If you decide to save the report as a Scheduled Report, then you can modify your
selections.
- Date: The report can contain data for Month-To-Date, Last 1 Day, Last 7
Days, or Last Month.
- The "All Devices" check box can also be used to include all devices your
account. This option can only be used for the "Last 1 Day" Duration.
- Frequency: available options will vary depending on the selected Status Duration:
- A "Month-To-Date" report will be delivered on the 15th of each month.
- A "Last 1 Day" report will be delivered daily.
- A "Last 7 Days" report will be delivered once each week. A specific day of
the week can be selected.
- A "Last Month" report will be delivered on the 1st of each month.
|
- This report contains values for started, stopped, and continued event types.
Note that the sum of data "From" and "To" the device in its "stopped"
transactions corresponds to the value in the "Data Usage" column in the Device
Daily Traffic Usage report.
- For a User-Defined Range, the From date can be no earlier than 60 days prior
to the current date.
- It may take up to 15 minutes after a traffic event before it is reflected in
the report.
- The downloaded report will only contain the first 50,000 report entries.
- There is no limit to the number of entries delivered in the scheduled Account
Devices Detail report.
- Control plane information is not available for Dual-Mode A-LH devices.
|
|
Device, Status Activity
|
- Date: Select to include activity within the Month-To-Date, User-Defined
Range, Last 1 Day, Last 3 Days, Last 7 Days, Last Month, or
Provision-To-Date.
- Device Attribute: Select the method you will use to specify the devices
to include in the report: ICCID, EID, IMSI, or MSISDN.
- Device List: Device IDs must be separated by a comma or listed one per
line. A maximum of 10 devices can be entered.
If you decide to save the report as a Scheduled Report, then you can modify your
selections.
- Date: The report can contain data for Month-To-Date, Last 1 Day, Last 7
Days, or Last Month.
- Frequency: available options will vary depending on the selected Status Duration:
- A "Month-To-Date" report will be delivered on the 15th of each month.
- A "Last 1 Day" report will be delivered daily.
- A "Last 7 Days" report will be delivered once each week. A specific day of
the week can be selected.
- A "Last Month" report will be delivered on the 1st of each month.
|
- Provision-To-Date includes all activity since the date the device was
provisioned.
- It may take up to 60 minutes before new devices or recent changes are
reflected in the report.
|
|
Contract Term Report
|
- Duration: Enter the number of days that the Contract Term Report will
report data on. For example, if you enter 5 as the Duration, the report returns
all devices with a Contract Term scheduled to complete in 5 days or less.
If you decide to save the report as a Scheduled Report, then you can modify your
selections.
- Frequency: The report can be delivered Daily, a Specific Day of the
Week, or on the 1st or 15th of each month.
|
|
0 Comments